ASAHI THERMOFIL is a top world producer and supplier for Engineering Plastics that hold strategic position in all technical applications especially in Automotive, Electric and Electronics (E&E), Appliances industries.

POLYAMIDES 6.6 (LEONA), modified POLYPHENYLENE ETHER (XYRON) and POLYACETAL (TENAC: both Homopolymer and Copolymer ) and THERMOFIL a range of  PP, PA, PBT, PE, PS ABS compounds.

Back to Top

DSM RESINS B.V. is a subsidary of DSM Group producing many different products for paint and coating industry. DSM RESINS is a global market leader in polyester resins for powder can and coil coatings DSM RESINS is also very active in decorative, protective and maintenance and industrial markets as a resin supplier. DSM Resins provides raw materials and technical assistance in the fields of:

• Polyester resins for powder coatings
• Polyester and phenolic resins for can and coil coatings
• Alkyd and acrylic resins for decorative, general industry and automotive paints
• Epoxy esters
• Elastomers

Back to Top

DSM SPECIAL PRODUCST is a subsidary of DSM GROUP producing speciality products via Toluen oxidation for the paint and genaral industry. Among the most widely known and used products of DSM Special products are;

• Benzaldehyde
• Benzoic Acid
• Sodium and Potasium benzoate
• Benzyl Alcohol

Via captive use of benzaldehyde, DSM Special products also produces;

• Benzoin
• Cinnamic Aldehyde
• Cinnamic Alcohol
• Dibenzyl amin
• 3-Phenyl-Propanol-1

Back to Top

Peroxid Chemie corporation based in Munich /Germany is the leading manufacturer of chemical specialities as Organic peroxides ,Catalysts Initiater ,persulfates and Inhibitors .

The main products are Organic preoxides and persulfates .Morethan 50% of all polymer require organic peroxides and persulfates as initiaters .

Peroxid - Chemie supply approxmiately 130 different organic peroxides for the following main applications :

1- ORGANIC PEROXIDES:

• Polymersation of monomers : vinylchloride ;ethylene ;styrene ;vinyl acetate
• Crosslinking of polymers : thermoplastics : PE (LDPE)(HDPE) and elastomer SBR/NBR/NR Rubber ,ethylene propylene Rubber EPDM
• Curing of unsaterated polyester resins : SMC/BMC ;coating ,open mould

2 - INORGANIC PERSULFATES :

Ammonium, Kalium ve Sodyum dan klasik ve elektrokimyasal olarak üretilmiş olan inorganik dipersulfat konusunda avrupa da lider konumundadır.

Inorganic persulfates has the following main applications :

• As initiater for the polymer and fibre industry
• For the oxidation of dyes and colorants in the textile and cosmetic industries
• In detergents and cleaning products

3 - ACCELERATORS SMC/BMC : AMIN/KOBALT

SMC/BMC de macunun daha çabuk donması arzu edildiği takdirde .

4 - INHIBITORS SMC/BMC :

SMC/MMC de macunun stoklamak arzu edildiği takdirde .

Back to Top

HEUBACH GmbH has a long history which starts with glass production in 14th century. Begining 19 centuries, HEUBACH family expanded business into pigment manufacture and early in 20th century branched into Zinc Oxide manufacture. After World War II, family started again as a pigment producers after they withdrew from East Germany.

Today, HEUBACH is one of the largest colorant marketers in the World having production facilities in Germany, USA and India. Being innovative for more than 350 years, every year new and improved products are becoming part of the Heubach's product lines which is a strong commitment to continue as a leading pigment producer.

Below the product portfolio of HEUBACH GmbH;

• Anticorrosive Pigments-HEUCOPHOS
• Inorganic Pigments-HEUCOTRON, HEUCODUR, ECOPAQUE
• Organic Pigments-HEUCO Pigments
• Pigment Preparations-AQUIS, HEUCOSPERSE, MICROSPERSE
  

Back to Top

Kemira Pigments is a subsidiary of Kemira OY, the Finnish chemicals group, with the headquarters in Helsinki, Finland.

Kemira Pigments produces high quality titanium dioxide pigments with a plant located in Pori, at the west coast of Finland. The capacity of production is 120 Ktons of titanium dioxide yearly. Other products are UV-TITAN (ultrafine transparent titanium dioxide) and FINNTI (titanium chemicals). Kemira utilizes sulphate process in the production of titanium dioxide.

The main application for KEMIRA titanium dioxide pigments are:

• coatings,
• paper,
• plastics,
• inks,
• rubber,
• food

Most widely known and used titanium dioxide products from Kemira Pigments are Kemira RDI-S for ink and Kemira 650 for general paint industry.

UV-TITAN titanium dioxide products are used in lacquers, plastics and cosmetics. Whereas FINNTI titanium chemicals are used for colored inorganic pigments, catalyst and ceramics

Emphasis has always been quality. Kemira Pigments OY received its ISO 9001 certificate in 1993 as being the first TiO2 producer to achieve ISO 9001 registration.

Back to Top

Company Kolb, which is specialist about high performance textile auxiliaries, is producing following chemicals at its production plants in Switzerland and Holland.

• Alcohol ethoxylates - branched C-chain
• Alcohol ethoxylates - linear C-chain
• Alkylphenole ethoxylates
• Ethoxylated amines
• Fatty acids ethoxylated
• Low foaming alcohol alkoxylates
• Polyethylene glycols
• Sorbitan ester ethoxylates / Polysorbaten
• Synthetic ester oils
• Triglycerides ethoxylated

Kolb is the largest producer of non-ionic surfactants in Europe and its textile auxiliaries cover the whole range of following process steps.

• Auxiliaries for fibers and yarns
• Dyeing and printing
• Finishing
• Pretreatment
• Specialities

Back to Top

LVM is a multinational producer of VCM (Vinyl chloride Monomer),PVC Resin (Polyvinyl chloride) ,compounds and speciality compounds with factories strategically located in Belgium ,France and Netherland .

The Factories :

VCM (Vinyl chloride Monomer)production :
Belgium Tessenderlo
Nameplate capacity : 550.000 tons annual

Suspension PVC (Polyvinyl chloride) production :
Beek /Netherland
Nameplate capacity : 220.000 tons annual

Marzinyarke /France
Nameplate capacity : 220.000 tons annual

Compounds productionr :
Netherland and France
Nameplate capacity : 60.000 tons annual

The products and applications :

• MARVYLAN : PVC Resin
  pipes-pvc profiles-building construction-healthcare -automotive
• MARVYFLO :
  A range of free flowing compounds for the powder slush moulding for the automotive industry .
• MARVYLEX :
  Easy processable vinyl based thermoplstic elastomer with excellent mechanical properties .
• MARVYLOY :
  Engineering polymers combining intrinsic flame retardency with easy processability .
• TEFABLOC :
  A wide range of quality PVC compounds ,coloured or neutral
• TEFANYL :
  A range of SBS or SEBS based thermoplastic elastomers for industrial parts and consumer goods
• TEFAPRENE :
  Styrene based thermoplastic elastomer compounds for the shoe industry

Back to Top

For over 100 years the Jeffrey Mine has been a leader in the production of Chrysotile fibre .

Headquarters :

The Jeffrey Mine is located at Asbestos Quebec ,Canada .

Mine production capacity :

Crysotile fibre production capacity from mine is appr. 250.000 tonnes anually .

Approximate World Utilization of Chrysotile :

• 80% Chrysotile-cement materials
• 17% Friction and Gasketing Materials
• 3% Other uses.

Fibre Grades :

Jeffrey Mine toplam crysotile grubunun yaklaşık 100 değişik standartı mevcuttur .Bunlardan en yaygın şekilde tüketilen aşağıdakilerdir .

• 6D-30
• 6D-24
• 6D-20
• 6D-12
• 6D-04
• 6D-02

Back to Top

Pemco International was established on 1st October 1997 following the purchase of worldwide Enamels and Ceramics business formerly owned by Bayer. However, the original Porcelain Enamel Manufacturing Corporation was formed in Baltimore,USA, by the Turk family in 1911.

Today, PEMCO International truly is a new group with a long history centred around a strong reputation for quality, innovation and service.

In early part of 20th century, PEMCO Corp. Ýn the USA was a pioneer in selling porcelain enamel frit.

Today, through a continued focus on research and development in well-equipped laboratories with experienced and qualified staff, PEMCO International maintains this pioneering tradition.

PEMCO's areas of expertise include,

• Porcelain Enamel Frits
• Electrostatic Powders
• Pre-milled ready-to-use systems
  
• Colour Oxides
  
• Ceramic Frits
  
• Screen Printing Pastes
  
• Enamel and Ceramic Additives

Each of these segments are very comprehensive and includes many products which have been developed to meet the specific requirements of individual customers.

PEMCO International has five manufacturing companies;

• PEMCO Emails Brugge in Belgium
• PEMCO Corp. In the USA
  
• PEMCO Emails in Italy
• PEMCO Esmaltes in Spain
• PEMCO Emelier in Argentina

Each company within PEMCO has access to the group's first class and extensive "Global Technology" which is then complemented by their own local market knowledge, experience and service to best meet the needs of their customers and markets.

End use applications for PEMCO products cover;

• Household appliances
• Sanitary ware
• Kitchen ware
• Boilers
• Architectural panels
• Industrial products

The application surfaces includes steel, aluminium, cast iron and glass.

Back to Top